How to Install the Lenco 9x9 Trim Tab Kit
The Lenco 9x9 trim tab kit is essential for improving the handling and performance of your vessel. Installing this kit can significantly enhance your boating experience. This guide will walk you through the steps needed to install the kit properly.
Tools Required
- Drill with drill bits
- Socket set
- Screwdriver set
- Measuring tape
Step-by-Step Installation Guide
- Prepare the Vessel: Ensure your boat is securely parked and stable. Check that the transom area is clean and dry.
- Measure the Installation Location: Refer to the installation manual to determine the exact position for the trim tabs. Accurate measurements are crucial for optimal performance.
- Mark the Drill Points: Use a marker to outline where you will drill holes on the transom. This will include spots for mounting brackets.
- Drill Holes: Carefully drill holes at the marked points, being mindful of the size specified in the kit’s instructions.
- Attach the Mounting Brackets: Secure the brackets to the transom using the screws and bolts provided. Ensure everything is firmly in place to avoid movement during operation.
- Install the Trim Tabs: Slide the trim tabs into the mounting brackets. Make sure they are leveled and positioned correctly before tightening them securely.
- Connect Hydraulic Lines: Attach the hydraulic lines to the trim tabs, following the manufacturer’s specifications to ensure proper operation.
- Test the Installation: Power on the system to test the functionality of the trim tabs. Check for any leaks in the hydraulic connections and ensure the tabs respond to control inputs.
- Troubleshoot if Necessary: If the tabs do not operate correctly, consult the troubleshooting section of your manual. This may involve checking connections or recalibrating the system.
Tips for Optimal Performance
- Ensure regular maintenance of the trim tabs to prolong their lifespan.
- Adjust the trim tabs based on weight distribution and water conditions for better performance.
- Familiarize yourself with the operation before heading out on the water.
