Pronterface is a Windows program that allows you to control a 3D printer connected via USB cable. Pronterface offers a graphical interface that allows you to interact with and monitor a 3D printer. For example, you can move the motors of the three axes, control the temperature of the nozzle or the bed, and much more. From Pronterface, you can also send G-code commands to the printer via the console. With these, you can change virtually any setting or move the printer as you wish. For example, you can calibrate the BLTouch sensor, check the temperature of the components, restart the printer or reset the memory. When you open the program, just go to the Port section, and look for the connected printer. After that, click on Connect, and you will be able to control it. With Pronterface, you can configure buttons that automatically send a series of G-code commands. This is useful if there are commands you frequently use, like disabling the motors so that you can move the axes by hand, moving the motors to a specific position, or switching strands. Pronterface is portable, so no installation is required to use it. So, if you want to control your 3D printer from your computer, download Pronterface and enjoy one of the best options on the market.
